Boards

Adding boards
Overview electraform allows you to add as many boards / consumer units as is required - there are no restrictions. In order to do this efficiently, we rec...
Thu, 15 Aug, 2019 at 3:39 PM
Editing boards
Overview electraform allows you to add as many boards / consumer units as is required - there are no restrictions. In order to do this efficiently, we rec...
Thu, 6 May, 2021 at 9:31 AM
Making a board Three phase (TP)
Overview When you add a new board, you can decide whether the circuits are single phase or three phase Define the phase arrangement Click the Edit ...
Wed, 12 May, 2021 at 10:01 AM
A Distribution board that is not connected to a circuit within the installation
Overview electraform allows you to choose the Origin as the supply board, or a board that isn't referenced in this installation - for example: You are ...
Thu, 15 Aug, 2019 at 3:46 PM
A Distribution board that is connected to a circuit within the installation
Overview To supply a board from an existing circuit within the installation. Select the circuit  Click the hand icon next to the circuit that is go...
Thu, 15 Aug, 2019 at 3:47 PM
Choosing the engineer for a specific board
Overview electraform allows you to choose an engineer for every board in the certificate. There are a couple of things to consider before choosing an engi...
Thu, 15 Aug, 2019 at 3:05 PM
Deleting a board
Overview electraform allows you to delete boards, you need to consider the following before doing this: Make sure you are absolutely sure! this action c...
Thu, 15 Aug, 2019 at 3:47 PM
Re-order boards
Overview Often boards are added to the certificate that doesn't reflect how they form part of the installation. This feature allows you to re-irder th...
Fri, 16 Aug, 2019 at 7:59 AM
Split load boards
A typical split load board layout In order to layout the software as per the photograph follow these steps: Step 1 Click Edit board and se...
Wed, 22 Jun, 2022 at 12:28 PM