Circuits
Reference Method A Enclosed in conduit in thermally insulated wall: For example - Installation Methods 1 and 2 of Table 4A2 (non-sheathed cables and mul...
Wed, 12 May, 2021 at 9:50 AM
Whilst BS7671 has no indication on specific wiring types, many of the popular scheme operators do, so the Wiring types referred to in electraform are liste...
Thu, 24 Jun, 2021 at 9:54 AM
Overview Any circuit can be used to supply another board or consumer unit, below are the steps needed to ensure all circuit data and test-results are mirr...
Thu, 15 Aug, 2019 at 4:00 PM
Overview Any circuit can be used to supply another board or consumer unit, below are the steps needed to ensure all circuit data and test-results are mirr...
Thu, 15 Aug, 2019 at 4:10 PM
Overview Once a board has been defined as three-phase, you can make circuits triple-pole or TP. Choose the circuit Click the hand next to the circu...
Wed, 12 May, 2021 at 10:07 AM
Overview Once a board has been defined as three-phase, you can make all circuits triple-pole or TP. Click the Set all circuits to 3Ø (TP) button....
Wed, 12 May, 2021 at 10:14 AM
Overview If a board has been defined as all three-phase, you can make all circuits back to single-pole or SP. Click the Set all circuits to 1Ø (S...
Wed, 12 May, 2021 at 10:30 AM
Overview Any circuit can copied and pasted to a new location on the board. Please be sure you have the correct location as it will overwrite any details t...
Thu, 15 Aug, 2019 at 4:16 PM
Overview The Fill Column feature is a time saving tool that will help fill this page up quickly. Enter circuit designations To make sure this featu...
Thu, 15 Aug, 2019 at 4:24 PM
Overview Circuit details can be deleted quickly - use with caution! Select the circuit Click the hand next to the circuit whose values you want to ...
Thu, 15 Aug, 2019 at 4:28 PM