electraform support

If you want to change the certificate number and/or certificate colour open the certificate and in settings click the bar as shown in the image below: ...

If you want to change or add a job number open the certificate and in settings click the bar as shown in the image below: Enter your job numb...

There is an option to exclude the engineer's name from circuit charts which can be useful if the charts are likely to be accessible to the public. If y...

When the Measured Zs is greater than the Maximum permissable Zs as set out in Reg 411.1, the colour of the measured Zs will turn red as shown in the images...

Dependant on the type of installation you are certifying, you can opt for the extended inspection schedule that BS7671 suggests for installations with dis...

If you don't want to see the additional navigation bar at the bottom of each page click in Settings and Hide navigation bar from bottom of page as sho...

To add extra options to circuits in settings click Additional circuit options as shown in the image below: Change the required value(s) to ...

Based on your selections in the Observations section, electraform can auto-update the corresponding Inspection Schedule item with the same observation cod...

When the Measured Zs is greater than the Maximum permissible Zs as set out in Reg 411.1, the colour of the measured Zs will turn red to warn the user that ...